what's the latest version of firmware for Rane TTM-57SL?

Audio and Music

Updating and Configuring the Rane TTM-57SL Mixer

The final, legacy firmware version for the original Rane TTM 57SL mixer is v3.11. This version introduced "soft" (clickless) FlexFx routing and the ability to mute the AUX input for the "Live Feed" feature. Since the TTM 57SL is discontinued, no newer firmware updates exist to support modern software like Serato DJ Pro; it remains natively supported on legacy versions of Serato Scratch Live (up to v2.5.0).

To properly update and configure your connected Rane hardware, it's essential to consider the operating system and software you intend to use with the mixer. In this case, we'll focus on using the Rane TTM 57SL with Windows 10.

Running the Rane TTM 57SL on Windows 10

Running the legacy Rane TTM 57SL on Windows 10 requires specific retrofitting, as neither Rane nor Serato officially supports this combination. However, getting it to work is completely achievable if you follow the community-tested steps below.

1. Software Compatibility

You must use Serato Scratch Live (SSL) v2.5.0, which is the final version ever released. Note that the TTM 57SL is not compatible with modern software like Serato DJ Pro or Serato DJ Lite.

2. Resolving the Driver Installation Issue

On Windows 10, installing Scratch Live v2.5.0 directly often fails to install the necessary 64-bit ASIO audio drivers for the TTM 57SL. If your computer fails to recognize the mixer, use the following workaround from the Serato DJ community:

  1. Uninstall any current version of Serato Scratch Live on your PC.
  2. Download and install a much older version, specifically Serato Scratch Live v1.8.x.
  3. Plug in your TTM 57SL via USB. Let this older software version successfully force the initial hardware driver registration.
  4. Once the mixer connects and is recognized, download and install Serato Scratch Live v2.5.0 directly over it. The software will upgrade, but the vital underlying drivers will remain intact.

3. Disabling Driver Signature Enforcement

Because the original Rane drivers are ancient, Windows 10's strict security protocols may block them from loading. If you run into a connection bottleneck:

  1. Hold down the Shift key while clicking Restart in your Windows Start Menu.
  2. Navigate to Troubleshoot > Advanced Options > Startup Settings and click Restart.
  3. Upon reboot, press 7 or F7 to select Disable driver signature enforcement.
  4. Reconnect your mixer to allow the legacy driver to run freely.

4. Optimize Compatibility Settings

To ensure smooth operation:

  1. Right-click the Scratch Live desktop icon and select Properties.
  2. Go to the Compatibility tab.
  3. Check the box for Run this program in compatibility mode for: and select Windows 7.
  4. Check the box for Run this program as an administrator and hit Apply.

By following these steps, you should be able to successfully update and configure your Rane TTM-57SL mixer to work with Windows 10 and Serato Scratch Live v2.5.0. If you encounter any driver errors during the install or have questions about using the mixer as a standalone MIDI controller, further troubleshooting may be necessary.

Back to all articles