dnf refresh repos manually only

Linux and Unix

Disabling Automatic Background Updates in DNF

To force DNF to refresh repositories manually only and disable all automatic background updates, you need to change the configuration setting metadata_expire in dnf.conf and disable the dnf-makecache systemd timer.

Configuring DNF

Open the DNF configuration file in your preferred text editor:

sudo nano /etc/dnf/dnf.conf

Under the [main] section, add or edit the following line to set the metadata expiration to never:

metadata_expire=-1

Note: In older DNF versions, this setting might be metadata_expire=never.

Disabling Automatic Refreshes

DNF runs a systemd timer in the background to automatically cache repositories. Disable it to completely prevent automatic refreshes:

sudo systemctl disable --now dnf-makecache.timer

Now, DNF will only check for updates when you explicitly tell it to.

Manual Updates

To force a manual check and update your system, use the --refresh flag:

sudo dnf upgrade --refresh

To manually refresh your repository cache without installing anything, run:

sudo dnf clean expire-cache & sudo dnf makecache

Understanding DNF Speed Differences

The fundamental speed difference between APT (Debian/Ubuntu) and DNFv4 (RHEL/Fedora) comes down to architectural differences:

  • APT separates updating the package index (apt update) from installing software (apt install).
  • DNFv4 concurrently attempts to download new metadata while you try to run commands (like dnf install or dnf search) if it thinks your local cache is stale.

Bridging the Gap: Getting Debian Speed with DNF

If you are sticking with the default DNFv4 on RHEL 10, your manual metadata strategy (metadata_expire=-1 and disabling dnf-makecache.timer) will completely fix the slowness. It forces DNFv4 to operate exactly like APT—relying entirely on your local cache until you explicitly tell it to update.

Using DNF5 on RHEL 10

If you want to use the faster, rewritten-in-C++ DNF5 on RHEL 10, you can install it using the following steps:

Installing DNF5

sudo dnf install dnf5

DNF5 lives inside the Extra Packages for Enterprise Linux 10 (EPEL 10) repository. To enable the EPEL repository on your machine and get DNF5, you can pull the release package directly from the Fedora Project EPEL repository by running:

sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-10.noarch.rpm

Once that repository file is registered, refresh your system's cache and install the tool:

sudo dnf makecache
sudo dnf install dnf5

Configuring DNF5 for Manual-Only Index

Open its specific config file:

sudo nano /etc/dnf/dnf5.conf

Add the following line to stop it from automatically updating the index during standard commands:

cacheonly=metadata

Your New Debian-Style Workflow

Instead of apt update, run sudo dnf5 makecache. Instead of apt install, run sudo dnf5 install <package>.

Back to all articles